3D Potter 3600 ml Linear Actuator Ram
The 3600ml extruder, designed to be used with the 3D PotterBot Scara V4, comes with two 3.75” diameter poly-carbonate tubes. The 3600ml extruder is similar to the 4000ml, but its main purpose is for the Scara V4.
The 3600ml extruder is driven by a large closed loop hybrid stepper motor with a 0.625” Acme screw (larger than the 0.5” screw used on 3D Potter’s 1000ml and 2000ml). This is a much more robust drive system compared to the 2000ml extruder. It’s also capable of extruding thicker clay or paste at a much higher rate than the 2000ml. With a larger tube and the larger nozzle outlet, it is capable of larger-diameter nozzles up to .5″ (12.75mm).
**Note: This item does not qualify for free shipping. Shipping will be billed separately. Please contact us for an estimate.**
Linear RAM package includes:
– Extruder Assembly
– 2 poly-carbonate 3600 ml tubes
– Acme screw driver tool for fast loading/unloading
– Wire connector for motor
– Syringe with white lithium grease
– 4 nozzles: 3, 4, 5, and 6 millimeter
– Extra screws
– Extra seal
– Power supply with connector
When fully loaded with clay, extruder weight is ~27lb.