BlueCast LCD/DLP Ceramic Kera Master Resin – 500g 3D GARAGE – STAMPA 3D BERGAMO – BLUECAST

BlueCast LCD/DLP Cereamic – Keramaster

Special resin for models and prototypes with add of ceramics
This resin has been developed to improve the printing experience with high detail, high strength and a special matte surface finish (FEP / TEFLON resin tank needed).

Castable: NO – Castability: nd

Applications: models, rubber molds, high temperature applications (120 ° C)

Compatible with: all LCD printers like WanhAo D7, Anycubic 3d, Micromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power) and with all LED UV DLP printers like as Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember etc.

Washing mode: Ethyl / IPA alcohol 60 seconds
Drying with compressed air

UV cure: 60 min.

Shrinkage: Low

Tank bottom: FEP

Color: Gray or Beige

Size: 500 gr

 

Developed for LCD / DLP printers and compatible with all DLP 3d printers (405 nm).

– Low shrinkage and high dimensional accuracy

– Suitable for prototyping, silicone molds, rubber molds, dental and models applications

– Resistant to high temperatures

– Very low deformation after printing

– High definition and smooth surfaces

– Absence of toxic substances

– Washable with 90% / 99% methylated alcohol (PAH) or 90% / 99% ethyl alcohol.

Keramaster was created using nano ceramic particles that increase the mechanical resistance and print detail. The surface finish has a material effect.

 

<a href=”https://ultimate3dprintingstore.wufoo/forms/mpjdbbk04eq7tk/”>Fill out my Wufoo form!</a>