Jabil – TPE SEBS 1300 85A – Natural
Description
TPE-SEBS 1300 85A 3D printing filament is a Shore 85A elastomer that does not require drying to process and has excellent bed adhesion and ease of printing. TPE-SEBS 1300 85A has low moisture absorption and has better elasticity for applications that require high flexibility and durability. It works on all open-platform direct drive 3D printers and can be run on desktop 3D Printers with PTFE Bowden Tubes. TPE-SEBS can stretch over 500% and is much easier to print than TPU filaments.
TTPE-SEBS 85A can be used for parts that need elastomeric properties that can bend, flex and stretch without the need for a heated print bed and has demonstrated a very high success rate in printing complex geometries. TPE-SEBS is similar to rubber and other thermoplastic elastomers in its properties, soft to the touch while still being strong and flexible. It is well suited to printing parts that need to dampen vibrations or products that need to retain flexible properties under weather or heat exposure while still maintaining good elastic properties; such as seals, gaskets, no skid / no mark feet, soft touch grips for power tools, and no slip mats for auto interiors.
Applications
- Products that need to retain flexible properties under weather or heat exposure
- Parts that need to dampen vibrations
- Complex geometries
- Casting patterns
- Seals / Gaskets
- No skid / no mark feet
- No slip mats for auto interiors
- Soft touch grip for power tools
- Industries include
- Automotive
- Aerospace
- General Manufacturing
Advantages
- Easier to print than TPU filament
- Shore 85A elastomer
- High flexibility, bend and stretch (can stretch over 500%)
- Low moisture absorption
- Less visible layer lines
- Does not require drying to process
Specifications
Printing Temperature:
The optimal printing range is 240° – 250°C
Bed Temperature:
A bed temperature of 70°C will provide the best adhesion during printing.
Printing Speed:
Base printing speed of 25 mm/s
Infill speed of 25-30 mm/s
Wall speed of 25-30 mm/s
Initial layer speed of 10 mm/s
Cooling:
For best results, do not use a cooling fan while printing with TPE-SEBS.
Diameter(s):
2.85mm
Color(s):
Bed Adhesion:
Use a brim when printing on clean glass. When using a PEI sheet, use a skirt on a clean plate. There is no need for any additional adhesion methods.
Other Tips:
For best results, print TPE-SEBS 85A on a direct-drive printer. If attempting to print on a Bowden-style printer, using a PTFE or fluoropolymer-lined Bowden tube will increase success.
If the material starts to short feed or bind up in the extruder, turn down the feeder wheel tension. It is recommended to start with as little tension as possible.
Information Sheets
Print Settings
jabil_tpe-sebs-1300-85a_print-settings.pdf
Technical Data Sheets
jabil_tpe-sebs-1300-85a_technical-data-sheets.pdf
Safety Data Sheets
jabil_tpe-sebs-1300-85a-black_safety-data-sheets.pdf
jabil_tpe-sebs-1300-85a-natural_safety-data-sheets.pdf
Compare Materials
Jabil Powders
| View Powders | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| UTS (Mpa) Orientation |
Tensile Modulus (Mpa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
||||
| Material | XY | Z | XY | Z | XY | z | XY | XY | |
| PA 4000 | 46 | 37 | 1790 | 1130 | 34 | 12 | 1010 | 48 | 182 |
| PA 4050 GB | 44 | 46 | 3390 | 3380 | 6 | 5 | 221 | 33 | 181 |
| PK 5000 | 53 | 51 | 1305 | 1349 | 41 | 21 | 1241 | 83 | 197 |
Jabil Filament
| View Filaments | ||||||
|---|---|---|---|---|---|---|
| UTS (MPa) Orientation |
Tensile Modulus (MPa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
|
| Material | XY | XY | XY | XY | XY | XY |
| ABS 1400 LW | 35 | 2730 | 3 | 235 | 39 | N/A |
| PA 0600 | 49 | 2660 | 5 | 822 | 69 | 188 |
| PA 4035 CF | 66 | 6000 | 4 | 557 | 191 | 180 |
| PA 4500 | 56 | 1930 | > 100 | 830 | 62 | 190 |
| PA 4535 CF | 88 | 10600 | 3 | 525 | 125 | 190 |
| PC 1500 FR | 61 | 2210 | 6 | 850 | 51 | N/A |
| PETg | 45 | 1655 | 24 | N/A | N/A | N/A |
| PETg 0800 ESD | 39 | 1895 | 8 | 416 | 49 | N/A |
| PLA 3100 | 47 | 3240 | 6 | 207 | 31 | 155 |
| TPE SEBS 1300 85A | 6 | 19 | 900 | N/A | N/A | 163 |
| TPE SEBS 1300 95A | 11 | 93 | 780 | N/A | N/A | 165 |
| TPU 90A | 19 | 13 | 4540 | N/A | N/A | 220 |
| Diameter | 2.85mm, 1.75mm |
|---|
Professional packing and fast shipping
Due to our longstanding partnership with UPS FedEx DHL and other major global carriers, we are able provide a range of shipping options. Our warehouse staff is highly trained to package your goods exactly as per the specifications we offer. Before shipping the goods are carefully inspected and secured. Everyday we deliver thousands of packages to customers from all over the world. This is a testament to our commitment to be the largest online retailer worldwide. The warehouses and centers for distribution are situated in Europe and the USA.
Orders with more than one item are given processing time for each item.
Before shipping, we will conduct a thorough inspection of the items you've ordered. Currently, most orders are shipped within 48-hours. Expected delivery time is between 3 and 7 days.
Returns
The stock is dynamic and we do not fully manage it because of the fact that multiple stakeholders are involved, including our factory and warehouse. The actual levels of stock can change at any moment. It's possible that the stock may run out after your order has been placed.
The policy is 30 days. If you haven't received the product within 30 days, we are not able to issue a refund or an exchange.
For your item to be returned, it must be unopened and in the same state as you received it in. It must also be in the original packaging.
Related products
Filament
Filament
Filament
Filament
