Sale!

lulzbottazproxt3dprinterlulzbotshopwithconfidenceshopwithconfidenceexperiencethebestquality0.png

lulzbottazproxt3dprinterlulzbotshopwithconfidenceshopwithconfidenceexperiencethebestquality1.png

LulzBot TAZ Pro XT 3D Printer LulzBot

$ 1.373,75

SKU: mode_6541163200615 Category: 3D Printer Tags: 3D Printer, Assembly Level: Fully Assembled, Bed Size X: 280, Bed Size Y: 280, Bed Size Z: 586, Brand: LulzBot, Category: American Made, Category: High Volume, Diameter: 2.85mm, Printer Type: FDM 3D Printer

Description
shopping

Overview

The LulzBot TAZ Pro XT gives you a single extrusion 2.85mm tool head that can put down big layers in a tall 23″ build area with superior 3D print quality, and easy, professional results.

Single Extrusion HS+ Tool Head
2.85mm extruder featuring a hardened steel nozzle and extruder hobb capable of printing high-strength composite polymers like PA-CF and carbon-fiber filled Nylon along with more traditional materials like ABS, PETg, PLA, and NinjaFlex.
Large 280 x 280 x 586 mm build volume with heated build plate.
Automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features.
Enhanced 32-bit electronics for greater processing power, more memory, and quiet operation.
Filament runout detection.
Cable chain and reinforced electrical connectors for long wire harness life.
5″ full color touch screen.
Made in USA

Printing

Print Technology	Fused Filament Fabrication
Print Volume Dimensions	280 mm x 280 mm x 586 mm (11.02 in x 11.02 in x 23.07 in)
Print Volume	45,942 cm³ (2,803.58 in³)
Ambient Operating Temperature	From 5°C to 45°C (41°F to 113°F)
Operating Footprint	83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in)
Maximum Travel Speed	200 mm/sec
Leveling	Automatic Compensation
Calibration	Automatic X/Y/Z offset calibration
Connectivity	USB Serial or USB Flash Drive with Included 4gb Flash Drive

Included Tool Head	HS+ Tool Head \| 2.85 mm \| Hardened Steel \| 1.2 mm
Extruder/Hot End	E3D Titan Aero
Nozzle Diameter	1.20 mm
Nozzle Material	Hardened Steel
Nozzle Temperature	Up to 290°C (554°F)

Print Surface	Modular Heated Borosilicate Glass/PEI
Maximum Print Bed Temperature	Up to 120°C (248°F)
Print Bed Heat Up Time	From 18°C to 100°C (64°F to 212°F) in 10 minutes, 45 seconds

Layer Resolution	0.6mm – 1.0mm (0.027″-0.039″)
Calculated XYZ positional resolution	10, 10, <1 micron

Materials

Filament Diameter	2.85 mm
Supported Materials	Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.

Physical Dimensions

Boxed Unit Weight	20.86 kg (46 lbs)
Unit Weight	16.78 kg (37 lbs) without filament spool
Boxed Dimensions	88.9 cm x 30.48 cm x 66.04 cm (35 in x 12 in x 26 in)
Dimensions with 1kg Filament Spool	83 cm x 71 cm x 52 cm (32.67 in x 28 in x 20.47 in)

Software

Operating System Compatibility	GNU/Linux, Mac, Windows
Recommended Software	Cura LulzBot Edition Version 3.2 or newer
Firmware	Marlin
Supported File Types	.stl, .obj, .x3d, .3mf, .png, .jpg

Electrical

Power Requirements	100VAC-240VAC, 50Hz-60Hz, 3.2A max
Output	24VDC, 500 watts, 21 amps
Power Supply	PMC-24V150W1AA
Power Cable	IEC cord, C13 to region-specific connector

Professional packing and fast shipping

Due to our longstanding partnership with UPS FedEx DHL and other major global carriers, we are able provide a range of shipping options. Our warehouse staff is highly trained to package your goods exactly as per the specifications we offer. Before shipping the goods are carefully inspected and secured. Everyday we deliver thousands of packages to customers from all over the world. This is a testament to our commitment to be the largest online retailer worldwide. The warehouses and centers for distribution are situated in Europe and the USA.

Orders with more than one item are given processing time for each item.

Before shipping, we will conduct a thorough inspection of the items you've ordered. Currently, most orders are shipped within 48-hours. Expected delivery time is between 3 and 7 days.

Returns

The stock is dynamic and we do not fully manage it because of the fact that multiple stakeholders are involved, including our factory and warehouse. The actual levels of stock can change at any moment. It's possible that the stock may run out after your order has been placed.

The policy is 30 days. If you haven't received the product within 30 days, we are not able to issue a refund or an exchange.

For your item to be returned, it must be unopened and in the same state as you received it in. It must also be in the original packaging.

LulzBot TAZ Pro XT 3D Printer LulzBot

Overview

The LulzBot TAZ Pro XT gives you a single extrusion 2.85mm tool head that can put down big layers in a tall 23″ build area with superior 3D print quality, and easy, professional results.

Single Extrusion HS+ Tool Head

2.85mm extruder featuring a hardened steel nozzle and extruder hobb capable of printing high-strength composite polymers like PA-CF and carbon-fiber filled Nylon along with more traditional materials like ABS, PETg, PLA, and NinjaFlex.

Large 280 x 280 x 586 mm build volume with heated build plate.

Automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features.

Enhanced 32-bit electronics for greater processing power, more memory, and quiet operation.

Filament runout detection.

Cable chain and reinforced electrical connectors for long wire harness life.

5″ full color touch screen.

Made in USA

Printing

Print Technology

Fused Filament Fabrication

Print Volume Dimensions

280 mm x 280 mm x 586 mm (11.02 in x 11.02 in x 23.07 in)

Print Volume

45,942 cm³ (2,803.58 in³)

Ambient Operating Temperature

From 5°C to 45°C (41°F to 113°F)

Operating Footprint

83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in)

Maximum Travel Speed

200 mm/sec

Leveling

Automatic Compensation

Calibration

Automatic X/Y/Z offset calibration

Connectivity

USB Serial or USB Flash Drive with Included 4gb Flash Drive

Included Tool Head

HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

Extruder/Hot End

E3D Titan Aero

Nozzle Diameter

1.20 mm

Nozzle Material

Hardened Steel

Nozzle Temperature

Up to 290°C (554°F)

Print Surface

Modular Heated Borosilicate Glass/PEI

Maximum Print Bed Temperature

Up to 120°C (248°F)

Print Bed Heat Up Time

From 18°C to 100°C (64°F to 212°F) in 10 minutes, 45 seconds

Layer Resolution

0.6mm – 1.0mm (0.027″-0.039″)

Calculated XYZ positional resolution

10, 10, <1 micron

Materials

Filament Diameter

2.85 mm

Supported Materials

Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.

Physical Dimensions

Boxed Unit Weight

20.86 kg (46 lbs)

Unit Weight

16.78 kg (37 lbs) without filament spool

Boxed Dimensions

88.9 cm x 30.48 cm x 66.04 cm (35 in x 12 in x 26 in)

Dimensions with 1kg Filament Spool

83 cm x 71 cm x 52 cm (32.67 in x 28 in x 20.47 in)

Software

Operating System Compatibility

GNU/Linux, Mac, Windows

Recommended Software

Cura LulzBot Edition Version 3.2 or newer

Firmware

Marlin

Supported File Types

.stl, .obj, .x3d, .3mf, .png, .jpg

Electrical

Power Requirements

100VAC-240VAC, 50Hz-60Hz, 3.2A max

Output

24VDC, 500 watts, 21 amps

Power Supply