Prusa I3 MK2.5S / MK3S / MK3S+ Extruder upgrade Bondtech SE

 A lightweight high-resolution extruder upgrade for the popular Prusa I3 MK3S 3D printers, featuring an optimized design achieved with the help of the community.

This upgrade kit is compatible only with the original All Metal V6 hotend that is supplied with each Prusa.

Upgrade Your Extruder

Upgrade your extruder to a Bondtech Mini Geared with higher gear ratio – 3:1 – that allows for extra push force and higher resolution.

Print Faster Or With Higher Quality

Use a lightweight extruder that will allow your 3D printer to print faster or to achieve better surface quality.

Reduce 3D Printing Issues

Decrease the risk of heat creep to avoid clogs and improve filament feeding to avoid slipping and deformation that cause under and over extrusion issues.
For even more effective HotEnd cooling we recommend a fan with high pressure like Sunon’s MF40100V1-1000U-G99 or similar.

NOTICE

This Upgrade Kit does not include the gears (already supplied by Prusa).

This Upgrade Kit requires extra parts to install (X-Carriage Kit).

Working Temperature Limits

Bear in mind that if you use this upgrade kit inside a closed chamber, it will have the following set of working temperature limits:

• Due to the sensor plastic parts made of HT PLA up to 60°C (90-100°C when parts are annealed);
• Due to the stepper motor up to 80°C.

Upgrade kit With Optimized Design

This is the latest generation Bondtech upgrade for the popular Prusa I3 MK3S, with an optimized design achieved with the help of the community.

Bondtech Extruder For Prusa i3 MK2.5S & MK3S & MK3S+

This kit contains only the necessary parts to convert your current extruder to our own popular design based upon our BMG (Bondtech Mini Geared) extruder with 3:1 gearing ratio for better precision and resolution together with optimized geometry for the heatsink cooling and professional SLS 3D printed housing. It is also compatible with the MK2.5S model.

Lightweight BMG (Bondtech Mini Geared)

With this version we also lower the moving weight to reduce ghosting and vibrations or to allow increasing the printing speed. 15% of weight saving was achieved.

Product Main Features

This extruder upgrade kit is for the Prusa i3 MK2.5S / MK3S / MK3S+.
These are its main features:

• Adapted to fit Prusa’s new filament sensor;
• Includes one Bondtech’s BMG extruder with 3:1 gearing ratio;
• Optimized geometry for heat-sink cooling;
• Less moving weight to reduce vibration and ghosting;
• Professional SLS 3D printed housing.

Addressing 3D printing Issues

The enhanced housing design improves cooling and decreases heat creeping issues that all metal hotends have when printing with PLA. This small enhancement will avoid many clogs.The increased push force will drastically reduce slipping, shredding and deformation of the filament avoiding most of the common filament 3D printing issues that start with under and over extrusion.

STEP BY STEP GUIDES

These are the guides that apply to the Bondtech Upgrade Kit for Prusa i3 MK3S/MK2.5S With Mosquito Interface

00. Bondtech Prusa i3 – Firmware Update

01. Prusa i3 MK2.5S / MK3S Upgrade Kit – Strip Reusable Parts

02. Prusa i3 MK2.5S / MK3S – Mosquito Upgrade Kit – Installation

Technical Specification

• Article number : EXT-KIT-68
• EAN code : 7350011410651
• Net weight : 291,5g
• Gross weight : 380,2g
• Package Size : 137x94x65mm
• Gearing ratio : 3:1
• E-steps value : 415 @16 bit micro-stepping; or 830 @32 bit micro-stepping
• Extruder Housing: SLS Printed parts in Polyamide 12;

STEPPER MOTOR

Lightweight 25 mm pancake stepper with 18 N/m torque.
Max Input Current : 0.8A
Max chamber working temperature : 80°C

Weight Reduction:

343,2g of parts coming out and 291,5g of parts coming in. A 51g (15%) weight save.

X-Carriage: Requires buying or 3D printing new X-Carriage R2 Front and Rear; Firmware: Bondtech adapted version required.

Licensing: This Project is licenced under GPL V3.0 and the STEP-files are available for download.