Jabil – ABS 1400 LW – Black
Description
Jabil’s ABS 1400 LW is easy to print with balanced properties that consistently lay flat. It has minimal warping when printed with 100% infill in a non-heated chamber system. It also maintains good layer-to-layer adhesion from the bottom of the build to the top, with excellent surface appearance. The ABS 1400 LW is great for applications where the properties of ABS are wanted, but low warp is required.
Jabil’s ABS 1400 LW is more durable and heat resistant to parts printed with PLA and can be used with Direct Drive or Bowden Tube 3D printers. The material also can stand up to several finishing processes such as vapor polish, sanding, dyeing, painting, and adding a gloss finish. The 1400 LW material is a great option for prototypes and parts that require the ability to stand up to a lot of wear and tear, particularly given its multiple finishing processes.
Applications
- Applications where properties of ABS are wanted, but low warp is required
- Prototypes and parts that require enhanced durability
- Brackets
- Housings
- Jig, fixtures, and tooling to aid in manufacturing
- Automotive
- Aerospace
- General Manufacturing
Advantages
- Good layer-to-layer adhesion.
- More durable and heat resistant than PLA.
- Stiffer than most ABS filament.
- Reduced CLTE (continuous level, linear thermal expansion)
- Improved Deminsional Stability
- Stands up to finishing processes such as vapor polish, sanding, dyeing, painting, and adding a gloss finish.
- Good chemical resistance to most fluids.
Specifications
Printing Temperature:
The optimal printing range is 275° – 295°C
Bed Temperature:
The hotter the better, up to 110°C
Printing Speed:
Base printing speed of 60 mm/s
Infill speed of 45 mm/s
Wall speed of 40 mm/s
Initial layer speed of 20 mm/s
Cooling:
For best results, use a cooling fan speed of 5%. Some printers will run best with no cooling fan. Make sure to have the fan off for the first layer.
Diameter(s):
1.75mm and 2.85mm
Color(s):
Bed Adhesion:
Suitable adhesion can be obtained with PVA-based glue stick on a glass bed. A brim should be used. If the printer being used is unable to maintain the recommended bed temperature, an ABS/acetone slurry or a PEI sheet may be used to help adhesion.
Other Tips:
If there are burn marks on the parts while printing, reduce the temperature by 5°C and make sure to clean off the nozzle. Turn off combing settings if using Cura.
For strong parts, print at the higher end of the recommended temperature range. It may also help to reduce the print speed, turn the fan completely off, reduce the layer height, or increase the infill/ skin overlap.
Information Sheets
Print Settings
jabil_abs-1400-lw_print-settings.pdf
Technical Data Sheets
jabil_abs-1400-lw_technical-data-sheets.pdf
Safety Data Sheets
jabil_abs-1400-lw_safety-data-sheets.pdf
Compare Materials
Jabil Powders
| View Powders | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| UTS (Mpa) Orientation |
Tensile Modulus (Mpa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
||||
| Material | XY | Z | XY | Z | XY | z | XY | XY | |
| PA 4000 | 46 | 37 | 1790 | 1130 | 34 | 12 | 1010 | 48 | 182 |
| PA 4050 GB | 44 | 46 | 3390 | 3380 | 6 | 5 | 221 | 33 | 181 |
| PK 5000 | 53 | 51 | 1305 | 1349 | 41 | 21 | 1241 | 83 | 197 |
Jabil Filament
| View Filaments | ||||||
|---|---|---|---|---|---|---|
| UTS (MPa) Orientation |
Tensile Modulus (MPa) Orientation |
EaB (%) Orientation |
Unnotched Impact Energy (J/m) Orientation |
Notched Impact Energy (J/m) Orientation |
Melt Temperature (°C) |
|
| Material | XY | XY | XY | XY | XY | XY |
| ABS 1400 LW | 35 | 2730 | 3 | 235 | 39 | N/A |
| PA 0600 | 49 | 2660 | 5 | 822 | 69 | 188 |
| PA 4035 CF | 66 | 6000 | 4 | 557 | 191 | 180 |
| PA 4500 | 56 | 1930 | > 100 | 830 | 62 | 190 |
| PA 4535 CF | 88 | 10600 | 3 | 525 | 125 | 190 |
| PC 1500 FR | 61 | 2210 | 6 | 850 | 51 | N/A |
| PETg | 45 | 1655 | 24 | N/A | N/A | N/A |
| PETg 0800 ESD | 39 | 1895 | 8 | 416 | 49 | N/A |
| PLA 3100 | 47 | 3240 | 6 | 207 | 31 | 155 |
| TPE SEBS 1300 85A | 6 | 19 | 900 | N/A | N/A | 163 |
| TPE SEBS 1300 95A | 11 | 93 | 780 | N/A | N/A | 165 |
| TPU 90A | 19 | 13 | 4540 | N/A | N/A | 220 |
| Diameter | 1.75mm, 2.85mm |
|---|
Professional packing and fast shipping
Due to our longstanding partnership with UPS FedEx DHL and other major global carriers, we are able provide a range of shipping options. Our warehouse staff is highly trained to package your goods exactly as per the specifications we offer. Before shipping the goods are carefully inspected and secured. Everyday we deliver thousands of packages to customers from all over the world. This is a testament to our commitment to be the largest online retailer worldwide. The warehouses and centers for distribution are situated in Europe and the USA.
Orders with more than one item are given processing time for each item.
Before shipping, we will conduct a thorough inspection of the items you've ordered. Currently, most orders are shipped within 48-hours. Expected delivery time is between 3 and 7 days.
Returns
The stock is dynamic and we do not fully manage it because of the fact that multiple stakeholders are involved, including our factory and warehouse. The actual levels of stock can change at any moment. It's possible that the stock may run out after your order has been placed.
The policy is 30 days. If you haven't received the product within 30 days, we are not able to issue a refund or an exchange.
For your item to be returned, it must be unopened and in the same state as you received it in. It must also be in the original packaging.
Related products
3D Printer
3D Printer
3D Printer
3D Printer
3D Printer
3D Printer
3D Printer