Phrozen Castable Resin W40 Orange – 500g

Phrozen Castable Resin W40 Orange is developed for reliable casting with clean burnout and zero ash content. It is designed for both jewelry and dental casting, specifically large organic statement pieces, such as signet, school ring, or bracelets that have a wide range of design elements like engravings and raised details.

Overview:

• 40% wax content
• Formulated for casting medium to large pieces.
• Low shrinkage, high precision. Smooth and crisp surface finishing.
• With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
• No foul or strong odor.

Tips:

• XY Resolution: 0.050mm
• Shake well before use
• We recommend washing your prints with 95% IPA and drying it with an air gun
• Note: Please don’t soak your prints in 95% IPA for over 30 seconds at a time.

Precautions:

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water. DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.

Specifications:

• Weight: 500g per bottle
• Density: 1.05 g/cm3
• Viscosity: 500-550 cP
• Recommended layer height: 50 um
• Surface Hardness: 60 Shore D
• Verified clean burnout with these investments: “Prestige Optima”, “Plasticast” and “Ultravest Maxx”
• Ash content: 0.0-0.1% (ASTM E1131; TGA)