Phrozen Pro Series Engineering TR250 High Temp Resin 1KG Phrozen

Phrozen Pro Series Engineering TR250 High Temp – 1 kilogram

Product may come in (2) bottles equaling 1 kilogram

Phrozen Pro Series Engineering TR250 High Temp is a great resin for highly detailed prints.

Specifications
Volume: 1KG Container
XY Planar Resolution: 50 micron
Z Resolution (Layer Height): 30-100 micron
Property: High hardness, toughness and resolution.
Way to Rinse: Clean with alcohol spray with air gun
Suitable for: LCD 3D Printer
Application: General modeling & prototyping
Viscosity: 67 cps
Tg: 70 degree Celsius
Break value: 10 MPa
Tensile Modulus: 1050 MPa
Hardness: Shore 76D
Elongation: 3 %
I-Zod Impact: 1.44 KJ/m2

Operating Instructions
We suggest using resin and printer indoors under well-ventilated conditions.
Avoid exposure to sunlight and indoor luminescence.
Please preserve your resin in a closed opaque bottle to avoid exposure to air.
Do not mix used and non-used resin together.
Please keep the resin out of reach from children.
Do not dump resin. Please cure resin and treat/recycle it as general plastics garbage.

Safety
Do not eat or swallow the resin. Wear goggles to avoid eye contact with resin, if you have eye contact with resin, wash your eyes with water thoroughly.
Resin might cause slight irritation to skin. Wear gloves when handling. Stop using if an allergic reaction occurs.
Resin has a slight odor. We strongly suggest you use it under ventilated conditions.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature (15 – 35 OC) and dry condition.