polySpectra COR Bio Photopolymer Resin for 385nm DLP 3D Printers polySpectra Products

COR Bio features an unprecedented combination of toughness, biocompatibility, and autoclavability – a critical triad for end-use healthcare and consumer applications.

• Best-in-class ductility (~100% elongation at break)
• Ability to survive steam autoclave sterilization
• Amazing impact resistance (un-notched IZOD >500 J/m)
• Very high working temperature (glass transition >135 °C)
• Grade 0 Cytotoxicity (ISO 10993-5)
• Excellent polar fluidic compatibility, including 10-100x lower moisture absorption than typical photopolymer resins

What are innovative engineers making with COR Bio today?

• Medical Device Components
• Dental Products
• Surgical Tools
• Consumer Products
• Podiatry / Orthotics
• Milli- and micro-fluidic devices

Important Notice: COR Bio photopolymer resin is intended for use by trained additive manufacturing professionals working in industrial, manufacturing, and laboratory facilities. At this time, we discourage printing with COR in home or office environments. We reserve the right to cancel your resin purchase if you cannot meet the safety requirements. 

Please Review All of the Requirements Before Placing Your Order

Facilities Requirements:

• Well-ventilated print and part-cleaning areas
• Chemical waste disposal (for used resin and used part-cleaning solution)
• Read the SDS

Equipment Requirements:

• Printer Ventilation: A well-ventilated 385nm DLP 3D printer
• Refrigerated Storage: A refrigerator or freezer to store resin below 5 °C
  • Please note to refrigerate on arrival
• Warm Before Printing: An oven or warm water bath to warm the resin to 40 °C
• Ventilated Cleaning Area: A well-ventilated area to clean parts
• Post-Curing Oven: A vacuum oven, or exploratory post-cure unit
  • COR Bio can be cured in a consumer microwave using polySpectra waveCure

PPE Requirements:

• Read the SDS
• Nitrile gloves
• Safety glasses
• Lab coat
• Long pants
• Close-toed shoes

Consumables Requirements:

• polySpectra SupaRinse is our validated part-cleaning solution

Training Requirements:

• Trained additive manufacturing professional
• Experience in the safe operation of SLA/DLP/LCD resin 3D printers
• Training in the cleaning, post-curing, and finishing of printed parts
• Training in the proper handling of resin, cleaning solvents, and chemical waste

By placing an order for COR Bio resin, you are attesting that the facility, equipment, and personnel at the shipping address meet the safety and training requirements above. We reserve the right to cancel your resin purchase if you cannot meet the safety requirements.