The Sinterit Sandblaster is designed for cleaning, polishing, and finishing of Sinterit printouts, using dry Abrasive Material.
Thanks to compressed air and little glass balls (Abrasive Material), using the Sandblaster you can penetrate all of the corners of your model and highlight every detail.
Dimensions |
480 x 370 x 360 [mm] | 18.9 x 14.5 x 14.1 [in] |
Weight |
15 [kg] | 33 [lbs] |
Working area |
410 x 310 x 200 [mm] | 16.1 x 12.2 x 7.9 [in] |
Power supply |
6 [W] |
Max pressure |
125 [psi] | 8.62 [bar] |
Abrasive material |
glass balls 200 [μm] |
Abrasive material container capacity |
5,44 [kg] | 12 [lbs] |
Input voltage |
230 [V] / 50 [Hz] | 120 [V] / 60 [Hz] |
Air consumption |
290 [l / min] |
Ultimate 3D Printing Store’s Sinterit Sales Region
The Ultimate 3D Printing Store can only sell Sinterit products within the following US States:
- Alabama
- Florida
- Georgia
- South Carolina
If you are not within this region, please reach out to Sinterit directly at contact@sinterit, or use Sinterit’s contact form.